Activated carbon fiber(ACF) filters are widely used to remove volatile organic compounds(VOCs) in air cleaning devices. The performance of ACF filters could be enhanced combining adsorption process with photodegradation process. In this study, to investigate this enhancement effect, a duct-type reactor was made and TiO2 was i㎜obilized on a co㎜ercialized ACF filter. Benzene, toluene, and m-xylene(BTX) were chosen as target compounds. Removal experiments for BTX were done under different air velocity and upstream concentration conditions. The range of inlet concentration was 200～1,400 ppb and the air velocities were 0.4, 0.7 and 1.0m/s. Adsorption by an ACF filter alone showed high removal efficiency of BTX, depending on the BTX species, the upstream concentration, and the air velocity. The combination of TiO2 and ACF filter significantly increased removal of benzene which was less removed than other pollutants by an ACF filter alone. It was found that the combination effect was small in removal test of toluene and m-xylene. Removal efficiency in the tested experimental conditions was decreased in order of toluene > m-xylene > benzene. Keywords：Photodegradation, Adsorption, TiO2, Activated carbon fiber (ACF), Volatile organic compounds (VOCs)